HT SERVO-JET 4000 AND HT SERVO-JET 4000 PURE – PROBABLY THE MOST ENERGY-SAVING HIGH-PRESSURE PUMPS IN THE WORLD.
Compared to a conventional high-pressure pump is omitted ineffective hydraulic systems. A plunger pump with three pistons coupled with a highly efficient Servo direct-drive boosts the overall efficiency to almost 98 %. At low power consumption (max. 55 kW) there is a large output of (max. 8.4 l/min). This makes it possible to supply several cutting jets at the same time and means the leap into a new, future-oriented efficiency class. – WITH ENERGY SAVINGS OF UP TO 40 %!
At the heart of every water jet cutting system is the high-pressure pump: The more efficient the pump, the more efficient the entire system.
ALL IN ONE – MANY ADVANTAGES FROM ONE SOURCE.
OF UP TO 40 %!
USE THE NON-BINDING EFFICIENCY CALCULATION (Cost and savings) when using a HT Servo-Jet4000 in your company.
OPERATING COST REDUCTION THROUGH LONG MAINTENANCE INTERVALS!
We recommend preventive maintenance at 1,250 HOURS.
Funding eligibility of the entire system up to 40 %!*
WE TAKE CARE of the entire subsidy processing.
*Max. – 40 % according to funding in Germany.
Max. – 30 % according to funding in Austria.
- ENERGY SAVINGS OF UP TO 40 % compared to conventional systems.
- HIGH ENERGY-EFFICIENCY: SERVO DIRECT-DRIVE no reative current, low and flexible current consumption.
- LOW CONNECTED LOAD required: No power consumption when the system is at a standstill – suitable for operations with low energy supply.
- Plunger pump with three pistons: HIGH POWER DENSITY and high level of efficiency of up to 98 %, replaces 6,000 var technology
- LONG MAINTENANCE INTERVALS, simple structure. No warm-up and startup phase, ready to go right away.
- PERMANENT PRESSURE CONTROL and integrated pulsation damping
- HIGHER CUTTING SPEED than with the pressure intensifier in a compareable combination
- LOWEST NOISE LEVEL OF >70 dB
- UNIVERSAL APPLICABLE in all water jet cutting machines and brands.
WHAT ARE THE ADVANTAGES IN TERMS OF COSTS AND BENEFITS BY THE SYSTEM-OPIMIZED USE OF A HT SERVO-JET4000?
DIRECT COMPARISON OF ESTABLISHED TECHNOLOGIES FOR GENERATING PRESSURE
(WATER JET CUTTING SYSTEM WITH ONE CUTTING HEAD).
PRESSURE INTENSIFIER PUMP
max. 37.000 W
approx. 5€ / h
high (by reactive current and hydraulics)
500 – 800 Operating hours
Inert pressure level
< 80 dB
optimized 20.800 W *
approx. 2,5 € / h
100 % (up to 200 % possible **)
Low, high efficiency
At 1,250 Operating hours preventive maintenance
optimized 30 Amps ***
Constant pressure level
< 70 dB
– 44 %
– 50 %
+ 100 %
+ 48 % more duration
– 37,5 %
– 12,5 %
With a HT Servo-Jet4000, the operation of several cutting heads with a delivery rate of max. 8.4 l/min is possible!
* up to – 40 % less energy consumption (depending on the required output)!
** in combination with HT Power-Technology
*** 50 Amps at maximum output
HIGH-PRESSURE PUMP HT SERVO-JET4000 PURE
PURE PERFORMANCE – PURE SPEED – PURE PRECISION.
The world’s first direct-drive plunger pump – especially developed for pure water cutting.
- The innovative technology allows for record-breaking switch cycles of under one second.
- The high-precision pressure control – combined with an accumulator – guarantees a constant water jet and allows for unparalleled cutting speeds.
- The use of quality components promises a long service life and the same for the high-pressure pump.